Mobily prepaid/postpaid iPhone 3G data & MMS settings
We are always happy to help iPhone owners, unlike Mobily who doesn’t seem to know how to handle the iPhone 3G. Here are the iPhone 3G data & MMS settings for a prepaid Mobily number:
Access Point Name (APN): web2
MMS settings:
APN: mms2
Username: blank
Password: blank
MMSC : http://10.3.3.133:9090/was
MMS Proxy: 010.003.002.133:8080
As for postpaid Mobily numbers, the settings are:
Access Point Name (APN): web1
MMS settings:
APN: mms1
Username: blank
Password: blank
MMSC : http://10.3.3.133:9090/was
MMS Proxy: 010.003.002.133:8080
To edit these settings on your iPhone: go to Settings, General, Network, Cellular Data Network. Enter the settings mentioned earlier. Exit the menu and you should be done.
Special thanks to Mikko who posted the settings here. Image from Bandar Raffah’s site.
Related posts:
- STC data settings for the iPhone 3G
- iPhone 3G tethering with Mobily/STC Guide
- Mobily iPhone 3G/3GS tethering now available for free
- Reserve a Mobily iPhone 3G now!
- Mobily update for current iPhones
(2 votes, average: 4.00 out of 5)
Loading ...
thats very useful, thanks!
Thanx it was realy helpfull, unlike mobily when I called, they know nothing, and he was telling me you need to purchase apps from the store so you will be able to send/ recieve MMS, hhhhh
Well, that’s odd and in a way makes sense with their level of support/knowledge :/
i copied these settings as they were…… i tried sending an mms but it comes mms sending failure … where have i gone wrong????
try to restart the iPhone.
Also today (Friday) mobily was upgrading their network
I finally configured mms for stc on my iphone.. here is how:
settings>General>Network> Cellular data Network>
APN mms.net.sa
MMSC http://mms.net.sa:8002/
MMS Proxy 10.1.1.1:8080
Then yu have to restart ur iphone
Good luck
thanks
it didn’t work for me. do i need to put a username or something…
Ok so here is the issue.
I can’t send any SMS or MMS, it keeps telling me failed. I followed the instructions to the letter, but no luck.
Any ideas?
I suggest you contact Mobily and ask them. keep us updated
Well, I called them and they asked me to go to the store and have the phone fixed there. When i did, the agents in the store refused to help me because My iPhone is AT&T bought and not Mobily.
However, i did fix the issue in a weird way, i can only send a text message to people who already sent me atleast one text. weird but thats how i go it to work.
Also, to this date i am unable to send MMS.
BTW mobily costumer support is by far the worst i have ever seen in my life.
I have iphone 3gs from at&t. I want it to work in Saudi could you please guide me where i can use it.
Tethering function disabled when i updated to iphone 3.1
3.1 does not allow tethering even if you install the mobile config file!
Now what??
Call Mobily 1100, see what will they say. then call them the next day …
I don’t know, i haven’t upgraded to 3.1 because i wont be able to jailbreak it anymore as far as i know.
they say tethering is NOT supported….also asked them about what prefix to use before smses so we can receive a delivery report and they say NOT SUPPORTED>>>
i tried using *N# before the actual sms text and it works on Mobily as well !
it sends u a reply with the delivery report!
now question…does this cost?
im on postpaid so i cant say…someone on prepaid pls try…
send a sms like this for example:
*N# whats up
Mobily relies on customers to fix their problems. thanks for posting the tip about *N#
and yes it costs money per report, I am not sure how much.
Call them again, ask them again how to enable report
don’t tell them the solution 
Hello… thanks for the settings, but i am still unable to send MMSs. I have a jailbroken AT&T iphone 3GS and a mobily postpaid SIM; any help would be appreciated.
hi mr. Khaled..aa
greetings to you man, i have iphone 3g-jailbroken and updated to firmware 3.1.2 under the carrier of mobily prepaid bundle..do you have any ideas regarding my problem,, i set my cellular data network to prepaid settings as instruction above and tried to restart even reboot my device, then now, when i tried to browse again at safari this message pop-up “Could not activate cellular data network- PDP authentication failure”…is there another settings again that i need to reconfigured? because to tell you honestly its a waste of time going to mobily tech-support people– half of them doesn’t know anything and just tell you useless information..
more power to you man!!hope you could find time at my problem..
i have a NO SERVICE issue with my iphone 3g ..firmware 3.0…modem 4.26.08…my carrier is mobily.
how do set mms in e71 nokia
Wait a minute.. above you said: “Access Point Name (APN): web2″ and then “APN: mms2″. How it would have two different APN? Hope I didn’t bother anyone..
the first one is for 3G data, the second is for MMS.
Well, I thought that the APN for 3G is:
“wap1″ (for postpaid) or “wap2″ (for prepaid).
Anyway thank you for your quick responce. You should operate the so-called customer service 1100
no problem, keep visiting the site
I buy mobily prepaid internet card for my laptop from mobily center,1G 100 per month,but it only works for 2 weeks,and they say for 1st month its free but doesnt work already after 2 wks.,wat the problem of my mobily prepaid card?please response me as soon as posible
Sorry, it’s a problem with mobily. contact them and ask them.
Hello Khaled. Im on mobily prepaid and I cant send MMS using the settings stated above – always message sending failed; i even tried restarting my iPhone but the same results.Could the number I am sending the MMS to matter? Im sending it to an international number. What do you think is the problem? Please advise.
most likely it is a problem with the number, call mobily 1100 and ask them.
Also isn’t better to just email?